The Dräger X-am® 5000 belongs to a generation of gas detectors, developed especially for personal monitoring applications. This 1- to 5-gas detector reliably measures combustible gases and vapors as well as oxygen and harmful concentrations of toxic gases, organic vapors, Odorant and Amine.
X-zone ® 5500 Draeger
State-of-the-art area monitoring – the Dräger X-zone® 5500 in combination with the Dräger X-am® 5000, 5100 or 5600 gas detection instruments can be used for the measurement of up to six gases and extends the portable gas detection technology to a comprehensive system with many applications.
in combination with the Dräger X-am® 5000, 5100 or 5600 gas measuring devices, is suitable to measure 1 to 6 gases
limitless area monitoring thanks to fenceline of up to 25 devices
Innovative area monitoring
The Dräger X-zone 5500 transforms the Dräger personal gas detection instruments X-am 5000, 5100 and 5600 into innovative area monitoring devices for a wide range of applications. A patented combination for increased safety – in addition to the personal air monitors carried on the body, these area monitors are positioned where gas hazards are expected.
Even from a distance, the illuminated green LED ring indicates that the air is free of toxic and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Dräger X-zone 5500 gas entry location permits gas to diffuse into the Dräger X-am 5000, 5100 or 5600 from all sides.
Up to 25 Dräger X-zone 5500 can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas.
A Dräger X-zone 5500 detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing master alarm in the unit detecting the gas contrasts with red/green flashing alarms of the connected units. This provides simple recognition of alarm status and the actual location of the hazard.
With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.
Continuous operation for up to 120 hours
The 24 Ah battery of the Dräger X-zone 5500 provides up to 120 hours of continuous operation – up to a complete working week.
Approval for Ex-Zone 0 (with Switch On or Switch Off for Ex-Zone 1)
daily function test and calibration not required after single on-site testing
individually configurable with the Dräger CC-Vision PC software (e.g. alarm frequency)
inductive charging station: easy and convenient non-contact charging
Data interface modbus
Integration in a control room system
Connection to external displays, such as the Visualisation Panel X-zone 5500
Secure area monitoring
Time, place and gas concentration are the most important data in the event of a gas leak. In an emergency, every second counts. Consequently, we have developed a more efficient and significantly safer method of area monitoring compared to conventional solutions: the Dräger X-zone 5500 together with X-zone Com. With these you can receive and view the measured data and alarms outside of the danger zone.
This module allows you to access the Dräger X-zone 5500 data wirelessly over the GSM network. Be it status requests or alerts via SMS using a periodic delivery of data via e-mail to a FTP server or a cloud service – the X-zone Com GSM module sends all data directly to the device of your choice.
Up to 25 Dräger X-zone can automatically connect themselves to a wireless alarmchain to accurately and comprehensively monitor large areas. Only a single X-zone Com is required to retransmit the data of the entire chain. All relevant information will reach those responsible within seconds.
Data from the Dräger X-zone 5500 group can also be displayed on a laptop via Bluetooth®. With the integrated GPS module, the position of the X-zone Com and thus the location of the hazard source is transmitted. A data logger continuously stores the measured values ensuring that no data is lost. Trend analysis using data from the cloud is possible.
Thus, all important measures covering evacuation and protection as well as the elimination of the problem and the resumption of work can be implemented quickly, efficiently and, above all, safely.
16 other products
Dräger Power Pack & Charging Set; NiMH Power Pack, Charging Module & Single Charger For use with X-am 2000, X-am 2500, X-am 5000, X-am 5100 and X-am 5600 NiMH power packs Comes complete with Charging Module & Single Charger, UK, European, USA and Asia electric plug attachments.
Safety at the workplace always takes priority: depending on the sensor selection, the single gas detector, Dräger Pac® 7000, provides a reliable warning against dangerous concentrations of 14 different gases. Unique: the optional 5-year warranty for the H2S, O2 and CO versions.
Alkaline Battery Pack for Draeger X-am Series Multigas Monitors
Alkaline Battery Pack for use with X-am 2000,2500,5000,5100,5600 Series
Requires 2 ‘AA’ batteries for operation (Does not include the batteries)
Provides over 12 hours of run time between battery changes.
Pen-sized gas leak detector to find flammable gases such as natural gas, liquid gas, methane, propane or butane, even in hard-to-reach places. Detection of even the smallest leaks below 50 ppm with a detection range of 10,000 ppm. In addition to pipelines, it can be checked for leaks in closed systems. If detected, an audible signal will sound and an optical alarm will be given with the flashing red LEDs.
The Dräger Polytron® 5200 CAT is a cost-effective explosion-proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DrägerSensor® Ex … DD that will detect most flammable gases and vapours. A 3-wire 4 to 20 mA analogue output with relays makes it compatible with most control systems.
Longer assignments are its speciality: the single gas instrument, Dräger Pac® 5500, has no lifetime limitation, and is ideal for fast and accurate personal monitoring and the detection of carbon monoxide, hydrogen sulphide or oxygen.
Polytron 5100 Electro-Chemical H2S Gas Detector Detector Draeger, Microprocessor based detector can be equipped with various electrochemical Dräger sensors for easy detection of ambient oxygen and various toxic gases.
In addition, the Polytron® 5100 can be integrated into your plant control and security system, thus providing additional diagnostic functions.
Clearance measurement was never this easy and convenient: The 1 to 7 gas detector detects toxic and flammable gases as well as vapours and oxygen all at once – either in pump or diffusion mode. Innovative signalling design and handy assistant functions ensure complete safety throughout the process.
The Dräger X am ® 2500 was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O2, CO, H2S, NO2 and SO2. Reliable and fully mature measuring technology, durable sensors and easy handling ensure a high degree of safety with extremely low operating costs.
Tags: x am 2500, Draeger Gas Detector, Ex-Proof Portable Gas Detector
The Dräger X-am® pump is an external pump for the portable gas detectors Dräger X-am® 2500, 5000, and 5600 – designed for clearance measurement, for example in tanks and shafts. The pump automatically switches on when it is connected to a running X-am® device. The change from pump mode to diffusion mode is fast and easy.
The calibration adapter is designed to calibrate a gas transmitter fitted with a a splash guard PIR 7000 / 7200 .
The calibration adapter is designed to calibrate a gas transmitter fitted with a process adapter PIR 7000 .
The Dräger PIR 7000 is an explosion proof point infrared gas detector for continuous monitoring of flammable gases and vapours. With its stainless steel SS 316L enclosure and drift-free optics this detector is built for the harshest industrial environments, e.g. offshore installations.
The 40/40I, a multi spectrum based on three IR bands (IR3), detects fuel and gas fires at long distances with the highest immunity to false alarms. The 40/40I IR3 can detect a 1ft2 (0.1 m2) gasoline pan fire at 215 ft (65m) in less than 5 seconds.
The 40/40I is the most durable and weather resistant flame detector currently on the market. Its new features include a heated window, to eliminate condensation and icing; HART capabilities for digital communications; lower power requirements; and a compact, lighter design.
Due to increased reliability, the 40/40 Series warranty period has been extended to 5 years and is SIL2 (TUV) approved to IEC 61508.