The UDC3200 Universal Digital
Controller packs new powerful features
The UDC1200 & UDC1700 Universal Digital Controllers are microprocessor-based 1/16 DIN and 1/8 DIN controllers, which combine a high degree of functionality and reliability at low cost.
They are fully dedicated to monitor and control temperatures, pressures and levels in a wide range of applications such as environmental chambers, furnaces, ovens, packaging machines and other applications in plastics and the food and beverage industries. The large and easy-to-read dual 4-digit display and tactile keypad make the UDC1200 and UDC1700 easy to configure and use. Their outstanding flexibility enables you to configure any unit for any application and change it if required. For the thousands of satisfied UDC1000/1500 users, the UDC1200/ 1700 controllers are downward compatible to existing UDC1000/1500 applications and installations.
Two different configuration levels (Configuration mode and set-up mode) provide easy access to parameters. A 4-digit security code prevents unauthorized changes.
Meets NEMA 3 / IP65 front-face protection against dust and water.
Accept seven different types of thermocouples, RTDs, current and voltage linear inputs. All inputs are configurable as standard.
The UDC1200 and UDC1700 can operate on any line voltage from 90 Vac to 264 Vac at 50/60 Hz. A 24/48 Vac/dc model is available as an option.
All the option boards are jumper free and detected automatically by the instrument.
All the outputs (including the control output) of the instrument can be changed to meet the exact customer’s needs.
Two soft alarms for PV, deviation high/low/absolute. A special loop alarm is also provided to detect faults in the control loop by continuously analyzing the PV response to the control output. Alarm inhibit is available on power up and setpoint switching.
Manual control (via bumpless transfer) is enabled by simply pressing the front-face AUTO/MAN key. The “SET” LED flashes and the output power is displayed on the lower display. Output can be adjusted with the upper and lower keys.
Pre-tuning is used to set up the PID parameters close to the optimum values, which the self-tuning algorithm uses to subsequently optimize the tuning parameters.
Packaged in 1/16 DIN, the UDC1200 limit controller is designed to provide a safety shut-off and optional alarm for use in a wide variety of applications.
The UDC1200 and UDC1700 provide up to three outputs for time and current proportioning, duplex mode (heat/cool), PV or SP retransmission, and alarms.
The current setpoint can ramp to a new-targeted setpoint by way of a user defined ramp rate.
Dual setpoint option is available on the UDC1200 and UDC1700. The current setpoint is selected by a digital input. This option is exclusive with UDC1200 limit model remote alarm reset.
An optional RS485 communications interface is available on the UDC1200 and UDC1700. It provides a link for up to 32 units and a host computer through ASCII or Modbus RTU protocol at up to 19200 baud.
A non-volatile memory based on EEPROM technology ensures data integrity during loss of power supply, with retention of more than 100 years. A 4-digit security code prevents unauthorized or accidental change.
Reference code : R59415
Reference code : 3357774-3355002
Reference code : E3S 5LB41
Manufacturer code : IME3015BFPKG
The UDC2500 universal controller is part of Honeywell’s complete line of ¼ DIN temperature controllers. This digital controller monitors and controls temperature and other variables such as flow, level and pressure in several applications, including furnace and ovens, environmental chambers and packaging machinery. The UDC2500 universal controller is also available with FM approval as a high/low temperature limit.
Reference code : 7020021200-24VDC
The Dräger Polytron® 5200 CAT is a cost-effective explosion-proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DrägerSensor® Ex … DD that will detect most flammable gases and vapours. A 3-wire 4 to 20 mA analogue output with relays makes it compatible with most control systems.
Reference code : 8344500
With combined AC/DC output stage
Smooth plastic housing to protect against deposits
PBT housing resistant against pickling solutions
With terminal chamber that can be rotated by 90°
Inductive Sensor IB0016/IBE2020-FBOA - IFM
Reference code : IB0016/IBE2020
Line Stud Type Flow Switch - Ensim - EFS-05S
Reference code : EFS-05S
The Dräger PSS® 3000 is a high performing breathing apparatus for firefighters. Combining comfort with exceptional pneumatic performance, it is designed for applications where simplicity and ease of use are key essentials. Lightweight yet robust, and easy to don, this advanced breathing apparatus provides the ultimate in breathing protection.
Reference code : 7021020100-24VDC