Effective control and monitoring of a process requires accurate and consistent measurement of different process variables. Honeywell’s SMV 3000 Smart Multivariable Flow Transmitter measures the flow of virtually any liquid, gas or slurry for which a primary flow element exists to provide a differential measurement and helps users improve product yield, process efficiency and plant safety.
STT 3000 Smart Temperature Transmitters
Honeywell’s microprocessor based STT350 Smart Temperature Transmitter
Honeywell’s microprocessor based STT350 Smart Temperature Transmitter converts a primary sensor input into an output signal for a conventional 4 to 20mA, two wire loop. This universal temperature input model readily accepts signals from a wide variety of industry standard thermocouples or resistance temperature detectors (RTDs) as well as a straight millivolt or Ohms sensor. Its output signal is either proportional to the measured variable or linearized to temperature, and is transmitted in either an analog 4-20mA format or a digital DE protocol format for direct digital integration to the TPS® control system. You easily select the analog or digital format for the output signal transmission through the Smart Field (SFC) which is the common hand-held operator interface for our Smartline™ Transmitters. All configuration, operation and communication functions are under the control of the STT350’s microprocessors and are implemented through the SFC.
16 other products
Honeywell’s SmartLine® ST700 Pressure Transmitters include absolute pressure, gauge pressure, flange mount and remote seal transmitters that meet industry requirements in performance, stability, reliability and rangeability. With innovative modularity and an intuitive human machine interface (HMI), these products are ideal for a wide range of industrial process applications.
I1CN-M1808N-O3U2 DC Inductive Sensor - Bedok
Manufacturer code : I1CN-M1808N-O3U2
Referans kodu : R55330
Honeywell’s Truline DR4500A recorder is a one to four-channel, microprocessor-based, circular chart recorder. Its “one-pen” stylus printhead produces up to four analog traces and prints alphanumeric chart data on a blank heat-sensitive chart. All four traces share the same time line reference, which the Truline prints. This eliminates the error caused by pen alignment offsets in conventional pen designs.
Combining versatility, ease of use and the latest in breathing apparatus design, Dräger’s PAS® Colt is among the most technologically advanced short duration and emergency escape units available.
I1CF-M3010P-O3U2 DC Three Wire Inductive Sensor - Bedok
The Dräger CDR 4500 full face mask, combined with our CBRN Cap 1 canister, provides a CBRN approved combination specially developed for use in civil defense and civil protection.
Breathe cool, stay safe: Dräger X-plore® 1750 NIOSH and 1760 is Dräger's new generation particle filtering face piece respirators, coming with distinct improvements in comfort and protection.
KP35 060-216566 Pressure switch - Danfoss , Reset function: Manual Max, Contact function: SPDT, Regulation range [bar] Pe: 0.40 - 3.50, Regulation range [psig] Pe: 6.00 - 50.00, Pressure connection size: 1/2, Pressure connection type: G, Pressure Male/Female: Male
M12 5 Pin 10 Meter Cable with Connector - SICK
Manufacturer code : YG2A15-100VB5XLEAX
Reference code : 7020021200-24VDC
Sensors in a plastic housing are used for many different purposes and often in applications where presumably stainless steel housings are used. When high reliability is required despite fast change of temperature in aggressive surroundings, our plastic design proves its superiority.
The plastic sealing compound combines rigidly with the plastic housing and the cable. Further constructive measures also prevent diffusion of aggressive emulsions into the cold rolling process. And if necessary this sensor can be replaced easily because it does not combine insolubly with its metallic surroundings. Proxitron sensors in a metal housing can be found in further product catalogues.