TESLİMATLI ÜRÜN
OPTIFLUX 4300 Electromagnetic Flowmeter - KROHNE

OPTIFLUX 4300 Electromagnetic Flowmeter - KROHNE



Kategori : Products

Marka : Krohne

The OPTIFLUX 4300 is an electromagnetic flowmeter (EMF) for advanced process applications with aggressive liquids or abrasive media. The high-end flowmeter is particularly suitable for critical applications requiring high accuracy and many diagnostic functions. It enables reliable measurement even under very harsh process conditions with temperatures up to +180°C / +356°F, low conductivities (≥1 µS/cm), high solid contents (up to 70%) and high pressures (up to 1500 bar / 21751 psi). For custody transfer applications, the OPTIFLUX 4300 has a wide range of certifications including OIML R49 and R117 or MI-001 and MI-005. It can also be used for flow measurement in district heating networks requiring MI-004 approval.

Request a Quote

qty


PAYLAŞ


  • 24/7 Technical Support
    24/7 Technical Support
  • Fast shipping
    Fast shipping
  • Secure Payment with PayTR
    Secure Payment with PayTR

The OPTIFLUX 4300 is an electromagnetic flowmeter (EMF) for advanced process applications with aggressive liquids or abrasive media. The high-end flowmeter is particularly suitable for critical applications requiring high accuracy and many diagnostic functions. It enables reliable measurement even under very harsh process conditions with temperatures up to +180°C / +356°F, low conductivities (≥1 µS/cm), high solid contents (up to 70%) and high pressures (up to 1500 bar / 21751 psi). For custody transfer applications, the OPTIFLUX 4300 has a wide range of certifications including OIML R49 and R117 or MI-001 and MI-005. It can also be used for flow measurement in district heating networks requiring MI-004 approval.

The OPTIFLUX 4300 is available in a wide diameter range up to DN3000 / 120". Its patented virtual reference option allows for a very cost-saving measuring mode without additional grounding rings – particularly when it comes to large diameters. Installation in measurement chambers subject to (constant) flooding is possible with the IP68 / NEMA 6P rated version. The meter is approved for use in hazardous areas and offers various digital communication options. A full on-site verification of the OPTIFLUX 4300 without process interruption can be carried out using the OPTICHECK service tool.

Product highlights

Bi-directional flow measurement over a wide dynamic range (turn down ratio: 1000:1)

Available with patented virtual reference grounding method: no grounding rings needed

Extensive flowmeter and process diagnostics (incl. NE 107)

For hazardous areas: ATEX, IECEx, NEPSI, FM, CSA, EAC, INMETRO

Standard measurement accuracy: ±0.2% or ±1mm/s of measured value (MV)

For custody transfer: OIML R49, OIML R-117; MI-001, MI-004, MI-005

PTFE, PFA, ETFE, hard rubber, soft rubber or PU liner: excellent chemical and abrasion resistance

Wide range of electrode materials

Special designs, sizes, inner diameters and liner thicknesses on request

Optional external coatings for offshore or subsoil installation (also acc. to ISO 12944)

Full bore design: No moving parts, no wear, no pressure loss

On-site verification of flowmeter with OPTICHECK service tool

Typical applications

General

Advanced applications with clean, aggressive or abrasive liquids

For low conductive media (>1 μS/cm)

Fiscal metering (custody transfer) of liquids other than water

Custody transfer flow measurement in district heating networks

Applications with high pressures (max. 1500 bar)

Chemical and other process industries

Dosing of additives

Custody transfer of chemicals

Conductive fluid chemicals

Process water, cooling water

Oil and gas industry

Water injection (high pressure)

Drilling mud

Produced water

Minerals and mining industry

Hydrocyclone feed lines

Sludge and slurries

Pulp and paper industry

Paper pulp

Chemicals (black liquor, bleach, etc.)

Wastewater industry

Sludge and sewage treatment

Specific References

No customer reviews for the moment.

16 other products