The Model 10 is designed for applications that require high capacity and accurate process control. A supply valve which is balanced by utilizing a rolling diaphragm, insures a constant output pressure even during wide supply pressure variations. Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the supply valve in accordance with the flow velocity.
Features
• Control sensitivity of 1/8″ water column allows use in precision processes.
• Pressure balanced supply valve prevents supply pressure changes from affecting the setpoint.
• Optional check valve permits Backflow of downstream pressure when supply is opened to atmosphere.
• Separate control chamber isolates the diaphragm from the main flow to eliminate hunting and buzzing.
• An aspirator tube compensates downstream pressure droop under flow conditions.
• Canadian Registration Number (CRN) certification for all territories and provinces.
• NO Yellow Metals available for harsh media.
Specifications
Supply Pressure 500 psig, [35.0 BAR], (3500 kPa)
Maximum Flow Capacity 40 SCFM (68 m3 /HR) @ 100 psig, [7.0 BAR], (700 kPa) supply and 20 psig, [1.5 BAR], (150 kPa) setpoint
Exhaust Capacity: 5.5 SCFM (9.35 m3 /HR) where downstream pressure is 5 psig, [.35 BAR], (35 kPa) above 20 psig, [1.5 BAR], (150 kPa) setpoint
Supply Pressure Effect: Less than 0.1 psig, [.007 BAR], (.7 kPa) for 100 psig, [7.0 BAR], (700 kPa) change in supply pressure
Sensitivity: 1/8 in Water Column [0.31 mBAR (0.031 kPa)]
Ambient Temperature: -40° F to +200° F, (-40° C to 93.3° C)
Hazardous Locations: Acceptable for use in Zones 1 and 2 for gas atmosphere; Groups IIA and IIB and Zones 21 and 22 for dust atmospheres
Materials of Construction
Body and Housing…………………………………………Aluminum
Diaphragms ………………. Buna N on Dacron (Std. unit only)
Trim ………………………………………..Brass, Zinc Plated Steel
Değerlendirmeler
Henüz değerlendirme yapılmadı.